{"product_id":"lamborghini-temerario-vanta-edition-f1-performance-exhaust-system-yonristic","title":"Lamborghini Temerario VANTA Edition F1 Performance Exhaust System - Yonristic Performance","description":"\u003cp\u003eLamborghini Temerario VANTA Edition Valved Performance Exhaust System Unlock the True Supercar Voice of Lamborghini’s 10,000-RPM Twin-Turbo V8 The Yonristic Performance VANTA Edition Exhaust System is engineered to transform the Lamborghini Temerario with a sharper, more exotic, and significantly more emotional V8 sound. Built around an X-pipe merge architecture, dual valve-control compatibility, precision-cast components, and comprehensive thermal protection, the system is designed to reduce restriction while bringing out the high-RPM character of Lamborghini’s flat-plane-crank twin-turbo V8. The complete system is fully sprayed with our signature gold Cerakote® ceramic thermal coating, including both the cat-back and catalyst\/front-pipe assemblies.\u003c\/p\u003e\u003cp\u003eThe high-temperature catalyst and downpipe sections then receive an additional layer of dedicated external heat shielding for maximum thermal protection. Available with 400-cell, 200-cell, or MaxFlow free-flow catalyst configurations, the package creates a complete performance exhaust solution from the turbo outlet area through the rear exhaust. X-Pipe Merge Architecture | OEM + Remote Valve Control | Gold Cerakote® Thermal Protection | Complete Catalyst Options The Lamborghini Temerario introduces an entirely new type of Lamborghini powertrain.\u003c\/p\u003e\u003cp\u003eAt its center is a 4.0-liter twin-turbo flat-plane-crank V8 capable of reaching 10,000 rpm, giving the engine the foundation for an exceptionally sharp and exotic exhaust character. The factory system, however, must balance sound with emissions requirements, noise regulations, thermal management, hybrid-system packaging, and everyday drivability. The Yonristic Performance VANTA Edition system is engineered with a different priority: allowing more of the V8’s natural frequency, turbo character, and high-RPM intensity to reach the driver while maintaining precise fitment and sophisticated valve control.\u003c\/p\u003e\u003cp\u003eX-Pipe Merge Architecture. At the center of the cat-back is a carefully developed X-pipe merge section that allows exhaust pulses from both cylinder banks to communicate before exiting through the rear system. Rather than keeping both sides fully separated, the crossover blends the two exhaust streams into a more unified frequency.\u003c\/p\u003e\u003cp\u003eAt lower RPM, the Temerario retains a deep and mechanical V8 presence. As engine speed rises, the crossover helps smooth the pulse interaction and develop a cleaner, sharper, increasingly exotic tone that better complements the engine’s extraordinary 10,000-rpm capability. The objective is not simply to make the car louder.\u003c\/p\u003e\u003cp\u003eThe X-pipe is designed to change the quality of the sound, helping move the Temerario away from a heavily muted turbo-V8 tone and toward the high-frequency supercar character expected from a Lamborghini flagship. Factory + Remote Valve Control. Every VANTA Edition system supports both the original Lamborghini valve-control architecture and the Yonristic remote-control system using the same core exhaust assembly.\u003c\/p\u003e\u003cp\u003eCustomers who prefer OEM integration can retain the factory valve actuators and allow the vehicle to control exhaust behavior through its original programming. For maximum control, the package also includes the Yonristic remote valve hardware. This allows the driver to command the valves directly rather than waiting for factory software to determine when maximum sound becomes available.\u003c\/p\u003e\u003cp\u003eWith the valves closed, the rear system maintains a more controlled character for cruising, residential driving, or longer trips. With the valves fully open, exhaust follows the freer-flowing route and allows the X-pipe to deliver the full character of the V8. When the remote-control configuration is selected, the package includes a valve simulator designed specifically to replicate the expected factory exhaust-valve signal.\u003c\/p\u003e\u003cp\u003eThis helps address valve-related warning lights or reduced-function conditions that may otherwise occur when the original valve actuator is no longer operating in its factory configuration. Full Gold Cerakote® Ceramic Treatment. The entire exhaust system receives our signature gold Cerakote® ceramic thermal coating.\u003c\/p\u003e\u003cp\u003eThis includes the rear cat-back assembly as well as the catalyst\/downpipe front sections. The Cerakote® layer creates a thermal barrier directly over the metal surface, helping reduce radiant heat transferred toward nearby chassis, hybrid, electronic, and engine-bay components. It also helps protect the exhaust material through repeated high-temperature cycles and reduces the heat-related discoloration normally associated with exposed performance exhaust components.\u003c\/p\u003e\u003cp\u003eThe coating provides a lightweight method of thermal management compared with surrounding every component in heavy conventional shielding, while giving the complete system its distinctive Yonristic gold appearance. Rather than claiming to eliminate engine overheating, the system is designed to reduce radiant exhaust heat and help manage thermal load around surrounding components, which is especially important within the tightly packaged Temerario drivetrain. Dual-Layer Downpipe Thermal Protection.\u003c\/p\u003e\u003cp\u003eThe catalyst\/downpipe assemblies operate immediately downstream of the turbochargers, making them the highest-temperature sections of the complete exhaust system. For this reason, ceramic coating alone is not the only form of protection used. Every downpipe and catalyst front pipe is first fully sprayed with the same gold Cerakote® ceramic treatment used throughout the exhaust.\u003c\/p\u003e\u003cp\u003eDedicated external heat shielding is then installed over the high-temperature sections. This creates two layers of thermal management: Cerakote® directly on the stainless steel surface, helping contain heat, meet thermal demands and protect the material. External heat shielding surrounding the downpipe and catalyst areas, providing an additional barrier between the extreme exhaust temperatures and nearby vehicle components.\u003c\/p\u003e\u003cp\u003eThis combination provides significantly more comprehensive thermal protection than an exposed performance downpipe. One-Piece Cat-Back Construction. The cat-back architecture uses long, continuous tubing sections with a minimum number of unnecessary joints.\u003c\/p\u003e\u003cp\u003eReducing intermediate connections creates a smoother exhaust pathway, fewer potential sealing points, and a cleaner acoustic transition through the X-pipe and rear sections. Critical transitions and mounting areas use precision-cast components where complex geometry and dimensional consistency are important. This allows smoother internal shapes and more repeatable fitment than assembling every connection from multiple cut and welded pieces.\u003c\/p\u003e\u003cp\u003eThe complete system is developed around vehicle-specific chassis geometry and factory mounting locations to provide direct bolt-on installation without cutting or permanent vehicle modification during a standard installation. One-Piece Catalyst \/ Downpipe Architecture. The optional front sections follow the same philosophy.\u003c\/p\u003e\u003cp\u003eEach side is designed as an integrated downpipe and front-pipe assembly rather than relying on multiple adapters and unnecessary connections. Because these components sit directly after the turbochargers, reducing internal restriction here has a major effect on the way exhaust gases leave the turbine housings. A cleaner flow path reduces downstream backpressure and allows more exhaust energy, turbo sound, and V8 frequency to reach the X-pipe and rear exhaust system.\u003c\/p\u003e\u003cp\u003eThree configurations allow the system to be tailored to the intended build. The 400-cell high-flow catalyst is the most refined performance configuration. It improves exhaust flow while maintaining greater catalyst density, providing a stronger sound and reduced restriction without taking the system to its most aggressive level.\u003c\/p\u003e\u003cp\u003eThe 200-cell high-flow catalyst provides a more performance-focused catted setup. Its lower-density catalyst core allows greater flow, stronger turbo presence, and a more aggressive exhaust character while retaining catalytic material within the system. The MaxFlow free-flow configuration removes the catalyst substrate for minimum restriction, maximum exhaust flow, and the strongest possible V8 sound.\u003c\/p\u003e\u003cp\u003eWhen paired with the X-pipe and fully open valves, this creates the most uncompromised Temerario configuration and is intended for off-road, track, closed-course, and competition use where permitted. Factory Sensor and OPF Integration. The catalyst\/front-pipe assemblies are designed around the Temerario’s factory sensor architecture and include the necessary provisions for applicable factory oxygen and OPF\/GPF-related sensors.\u003c\/p\u003e\u003cp\u003eRequired plugs and connection provisions are supplied according to the selected configuration and market specification. Catalyst-Related OBD2 Solution. The applicable catalyst package also includes an OBD2 solution designed specifically for catalyst-related monitoring that may occur when the original catalytic configuration is changed.\u003c\/p\u003e\u003cp\u003eThe OBD2 solution is intended specifically to address catalyst-related check-engine warnings associated with the modified exhaust system. It is separate from the exhaust-valve simulator and does not suppress unrelated engine, drivetrain, hybrid-system, or vehicle faults. Together, the catalyst-related OBD2 solution and valve simulator provide a more complete approach to the electronic changes associated with upgrading both the catalyst system and factory exhaust-valve control.\u003c\/p\u003e\u003cp\u003eThe result is a complete front-to-rear exhaust package engineered around sound, exhaust flow, thermal management, fitment, and driver control, giving the Lamborghini Temerario the sharp, aggressive V8 supercar character hidden behind the factory exhaust system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cp\u003eExhaust Architecture X-pipe merge crossover design Stainless steel Designed around the high-revving flat-plane-crank V8 One-piece-style cat-back architecture Long continuous tubing sections Minimal unnecessary joints Precision-cast transition and connection components Valve Control Compatible with factory Lamborghini valve actuators Yonristic remote valve-control hardware included Same exhaust system supports either configuration Remote valve control recommended for maximum direct sound control Exhaust-valve simulator included for remote-control configuration Valve simulator addresses valve-related monitoring only Ceramic Thermal Treatment Complete exhaust fully sprayed with gold Cerakote® ceramic coating Cat-back fully ceramic coated Downpipes and catalyst front pipes fully ceramic coated Helps reduce radiant exhaust heat Helps protect underlying exhaust material Helps resist heat-related discoloration Signature Yonristic gold ceramic finish Downpipe Thermal Protection Gold Cerakote® applied underneath heat shielding Dedicated external heat shielding over catalyst\/downpipe sections Dual-layer thermal-management architecture Designed for extreme turbo-outlet temperatures Helps reduce thermal exposure to surrounding components Catalyst Options 400-cell high-flow catalytic converters 200-cell high-flow catalytic converters MaxFlow free-flow \/ catless configuration One-piece downpipe\/front-pipe construction Full ceramic coating External heat shielding Electronics Applicable catalyst-related OBD2 solution included with catalyst package Designed specifically for catalyst-related monitoring Valve simulator supplied when using remote valve configuration Separate systems for catalyst and valve-related monitoring Unrelated vehicle faults remain diagnosable Sensor Integration Factory-style oxygen-sensor provisions Applicable OPF\/GPF sensor provisions Necessary sensor plugs supplied according to vehicle configuration Installation Vehicle-specific direct bolt-on architecture Factory-style mounting locations Precision-cast connection components No cutting required during standard installation No welding required during standard installation Professional Lamborghini or exotic-vehicle installation recommended Sound Character Stronger V8 presence at low RPM Cleaner pulse interaction through the X-pipe Sharper flat-plane character through the midrange Increasingly exotic high-frequency tone toward 10,000 rpm Maximum sound with valves fully open Catalyst selection provides additional sound tuning Catalyst Sound Levels 400 Cell: Refined high-flow V8 character 200 Cell: Aggressive catted performance sound MaxFlow: Maximum turbo and V8 intensity Estimated Performance Potential Cat-back, factory catalysts: approximately +8–15 HP \/ +8–15 lb-ft Full system, 400-cell: approximately +15–25 HP \/ +15–25 lb-ft Full system, 200-cell: approximately +20–35 HP \/ +20–30 lb-ft Full system, MaxFlow: approximately +25–40 HP \/ +25–35 lb-ft Final results depend on catalyst configuration, ECU calibration, fuel, vehicle condition, and dyno methodology. Estimates primarily represent potential gains from the combustion engine and should not be interpreted as guaranteed increases in total hybrid-system output.\u003c\/p\u003e\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cp\u003eLamborghini Temerario — 2026+ U.S. Model Year Engine: 4.0L Twin-Turbo Flat-Plane-Crank V8 HybridCombined Output: 920 CVMaximum ICE Engine Speed: 10,000 RPM International production and model-year designation may differ from the U.S. market. VIN verification is recommended before ordering catalyst or OPF\/GPF-related components.\u003c\/p\u003e\u003cp\u003eOff-Road Use Notice: MaxFlow and performance catalyst configurations are intended for off-road, track, competition, or closed-course use where applicable. Modification of factory catalytic converters, particulate filters, or other emissions-related systems may not comply with public-road requirements in certain jurisdictions. The purchaser and installer are responsible for confirming all applicable laws before installation or operation.\u003c\/p\u003e","brand":"Yonristic Performance","offers":[{"title":"Catback Exhaust \/ AISI304 Stainless Steel","offer_id":58727217103229,"sku":null,"price":6610.0,"currency_code":"USD","in_stock":true},{"title":"Catback Exhaust \/ Ti-4AL-6V Titanium","offer_id":58727217135997,"sku":null,"price":8162.0,"currency_code":"USD","in_stock":true},{"title":"Catback + Free Flow Headers \/ AISI304 Stainless Steel","offer_id":58727217168765,"sku":null,"price":8162.0,"currency_code":"USD","in_stock":true},{"title":"Catback + Free Flow Headers \/ Ti-4AL-6V Titanium","offer_id":58727217201533,"sku":null,"price":9783.0,"currency_code":"USD","in_stock":true},{"title":"Catback + High Flow Headers (200 Cells) \/ AISI304 Stainless Steel","offer_id":58727217234301,"sku":null,"price":8635.0,"currency_code":"USD","in_stock":true},{"title":"Catback + High Flow Headers (200 Cells) \/ Ti-4AL-6V Titanium","offer_id":58727217267069,"sku":null,"price":10255.0,"currency_code":"USD","in_stock":true},{"title":"Catback + Street Headers (400 Cells) \/ AISI304 Stainless Steel","offer_id":58727217299837,"sku":null,"price":9243.0,"currency_code":"USD","in_stock":true},{"title":"Catback + Street Headers (400 Cells) \/ Ti-4AL-6V Titanium","offer_id":58727217332605,"sku":null,"price":10795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0405\/5649\/5001\/files\/temerario.jpg?v=1789639839","url":"https:\/\/www.bafmotorsport.co.uk\/fr\/products\/lamborghini-temerario-vanta-edition-f1-performance-exhaust-system-yonristic","provider":"BAF Motorsport","version":"1.0","type":"link"}