Clio II inc 172 & 182 (1998-2012)
Rear Chassis Exhaust Mount Bush
EXH020 is designed to replace the usually broken internal rubber bush and fits into the original bracket. This new part can be easily fitted by simply cutting the remnants of the rubber webbing from the bracket and pressing our bush into position. Vehicles with twin exhausts, eg 172/182, use 2 bushes.
Diagram Position: 20
Number of Bushes Supplied: 1
OEM Part Number: 7700424339
1. Remove the original rubber bush from the exhaust mounting bracket using a hacksaw or sharp knife, clean any dirt and corrosion from the bore in the arm.
2. Push the new polyurethane exhaust mount into the bracket, making note of its correct orientation. We recommend using a G clamp or a vice to push in the exhaust mount.
Fitting tips: Smear washing up liquid on the outside of the bush, make sure there is enough space under the bracket to allow the bush to come through the other side. Support the bracket when pushing the bush in. lthough you can remove the bracket from the car to make the procedure easier, it should be possible to !t the bush with the bracket remaining on the vehicle.